The GD4VIS model (oad cell with built-in display) is part of the traction/compression load cells family. This solution innovation is to display the locally measured value. It is possible for GD4VIS using a built-in display, in addition to the weight display, visualize peak, insert filters and linearize load points. The GD4VIS is powered by 5-13 Vdc and has a digital output RS485. II is possible to ask for a portable solution.
Testes and calibrations performed in COMPRESSION with the dynamometer mounted on a bearing support with correctly tightened clamping screws.
EN61000-6-2, EN61000-6-3, EN61010-1
Click to enlarge image
| Material | Stainless steel |
| Nominal load | 1000, 2500, 5000, 10000 kg |
| Limit load | 150 % F.S. |
| Breaking load | 300 % F.S. |
| Nominal load deflection | 0.06 mm |
| Supply voltage | 5 - 13 V dc |
| Max absorption | 1.5 W |
| Linearity | 0,02 % F.S. |
| Hysteresis | 0,03 % F.S. |
| Reapeatability | 0,02 % F.S. |
| Input resistance | 700-710 Ohm |
| Output resistance | 700-705 Ohm |
| Thermal compensation | -10 / +50°C (14 / +122°F) |
| Operating temperature | -20 / +50°C (-4 / +122°F) |
| Temperature deviation zero | 0,003 % F.S. / °C |
| Temperature deviation full scale | 0,002 % F.S. / °C |
| Protection class | IP 40 |
| Display | 5 digits red LED |
| Mechanical keypad | 3 mechanical keys |
| Internal resolution | 24 bit |
| Digital filter | 0.1 Hz - 50 Hz |
| Fixing screws: diameter | 1-2.5t M8, 5-10t M10 |
| Fixing screws: resistance class | 12.9 |
| Fixing screws: tightening torque | 1-2.5t: 40 Nm, 5-10t: 70 Nm |
| Standard cable length | Panel male connector UTS010E6P (loose female connector UTS6JC10E6S), length to be defined |
| Optional | Panel male connector UTS010E6P |
| Length | Custom (body lead cell not connected shield) |
| Pin A | + IN |
| Pin B | - IN |
| Pin C | GND |
| Pin D | RS485 + OPTIONAL |
| Pin E | RS485 - OPTIONAL |
| Pin F | SHIELD |
General precautions to be followed in the installation and assembly of load cells:
